A Water Hardness Ion Selective Electrode sensor specifically designed to measure 0.5 ppm to Saturated (1x10-5 M to Saturated) concentrations of Water Hardness (Calcium and Magnesium).
Applications include, but not limited to: Water Softening Systems, Drinking and Mineral Waters, Sea Water.
Model
Specifications
CS6210WHD CS6510WHD CS6710WHD A Water Hardness Ion Selective Electrode
Lab Process Process Slope 25 ± 3 mV between 10-100 ppm @ 25°C
  PG13.5 NPT 3/4" Reproducibility ± 2%
CS6210Ca A Calcium Ion Selective Electrode sensor CS6510Ca A Calcium Ion Selective Electrode sensor CS6710Ca A Calcium Ion Selective Electrode sensor Interferences Zn2+, Fe2+, Cu2+, Ni2+
Temp. Range 0 to 40° C (if calibrated at that temp.)
Pressure Range 0 to 30 psi
Response Time 95% response in 30 seconds
Storage Long term, store dry; Short term, store in dilute calcium standard
Concentration Range 0.5 ppm to Saturated (as Ca2+)
 (1 x 10-5 M to Saturated)
pH Range 5 to 10 pH
Resistance 100 megaohms
Care, Maintenance & Cleaning Treat with distilled water followed by calcium standard
Isopotential Point 1 ppm
On-Line Capability Yes
Applications Water Softening Systems, Drinking and Mineral Waters, Sea Water
Site Meter